Precautions before using the solder fume absorber

1, Before using the solder fume absorber, check whether the machine power switch is off, whether the internal cartridge is prevented from being smooth, whether the body door cover and the box are firmly installed, and whether the speed knob is set to the “OFF” state.

2, the inlet air inhalation of solder fumes, harmful gases, soot ambient temperature range is: room temperature ~ 60 ℃, prohibit the use of too high or below this temperature range. Ambient humidity is: 40% ~ 80%, too high a humidity will make the filter core quickly fail and damage the internal circuit of the solder fume absorber, prohibit the use of humidity higher than 80% of the environment.

3, the power input of the solder fume absorber should be used within the specified rated voltage range (subject to the power mark on the body), it is strictly prohibited to use when the voltage is too high or too low, please turn off the machine and unplug the device when the voltage is found to be unstable, wait for the voltage to stabilize before use.

4, it is strictly forbidden to open the inside of the solder fume absorber, the warranty sticker on the body is the only proof that you enjoy after-sales service, please do not privately destroy or damage the warranty sticker on the body.